TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 589 of 1364

TM 9-2350-238-20-1

1

Tag and disconnect three shell connectors (1) at line connections.

2

Remove assembled washer bolt (2) and loop clamp (3).

3

Remove Iockwire (4) from two hexagon head capscrews (5). Remove two hexagon head

capscrews, two flat washers (6), and bracket (7) from mounting surface. Remove two sleeve

spacers (8).

NOTE

Adjusting nut (9), roller guide (10), Iockwasher (11), key washer (12), and mounting

nut (13) are supplied with neutral position sensitive switch (14); use care not to lose

them. If lost or damaged, replace neutral position sensitive switch.

4

Back off adjusting nut (9) until roller guide (10) can be removed, and remove roller guide.

5

Remove adjusting nut (9) and Iockwasher (11) from neutral position sensitive switch (14),

allowing neutral position sensitive switch to be removed from bracket (7). Remove key washer

(12) and mounting nut (13) from neutral position sensitive switch.

2-563