TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 585 of 1364

TM 9-2350-238-20-1

2-69. MAINTENANCE OF STARTER AND MOUNTING HARDWARE.

This task covers:

a.

Removal

b.

Inspection/Repair

c.

Installation

INITIAL SETUP

Materials/Parts

Gasket

Lockwasher

Lockwasher (2)

Lockwasheer (3)

References

TM 9-2815-202-24P

Equipment Conditions

2-384

Powerplant removed

General Safety Instructions

Starter weighs 80.0 lb (36.3 kg).

Be careful when removing it or installing it.

1

2

3

4

5

6

Remove hexagon head capscrew (1) and

two Iockwashers (2) securing starter

ground lead (3) to engine block.

Remove nut (4) and Iockwasher (5),

electrical lead (6), and starter cable (7).

Reinstall Iockwasher and nut.

Remove screw (8) and electrical lead (9)

at solenoid relay.

Remove three machine bolts (10) and

lockwashers (11).

Carefully pull engine starter (12) from

flywheel housing.

Remove gasket (13).

2-559