TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 62 of 1364
TM 9-2350-238-20-1
2-10. TOOLS AND SUPPLIES (CONT).
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)
Item
No.
19
(cont)
20
21
Interval
S
S
Item To Check/
Service
Transmission
Oil Filter
(cont)
Transmission
Breather
Auxiliary
Drive Clutch
Housing Drain
and Fill
Procedure
e.
f.
g.
h.
Dry cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
Clean parts with dry cleaning solvent (item 16,
appx C) and allow to dry thoroughly.
Install new preformed packing (7), new element
(6), and nut (5).
Install filter assembly (4), using three new
Iockwashers (2) and three screws (1).
Run engine and shift transmission several times
to check for leaks.
Dry cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area,
Remove breather and clean with dry cleaning solvent
(item 16, appx C). Dry, dip in oil, and install.
Drain oil from clutch housing.
a.
Remove drain plug (1) and drain into a suitable
container.
Not Fully Mission
Capable If:
Class Ill leaks or
any missing
plugs.
2-36
Back to Top
