TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 54 of 1364
TM 9-2350-238-20-1
2-10. TOOLS AND SUPPLIES (CONT).
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)
Item
No.
(cont)
Interval
Item To Check/
Service
Engine Oil
Filter and
Crankcase
Drain (cont)
Procedure
a.
b.
c.
d.
e.
Move vehicle to Ievel ground.
Remove crankcase drain cover (1) from bottom
of hull and remove drain plug (2) from engine.
Drain oil into a suitable container.
Dry cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
Clean crankcase drain plug (2) with dry cleaning
solvent (item 16, appx C) and install drain plug
and cover (1).
Replace both engine oil fitter elements semian-
nually, every 1500 mi (2414 km), every 150 hr,
or when engine oil is drained (TM 9-2815-202-
24P).
NOTE
The following steps are written for one en-
gine oil filter but apply to both.
Not Fully Mission
Capable if:
Class III
leaks
2-28
Back to Top
