TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 777 of 1364

TM 9-2350-238-20-1

7

Remove two hexagon socket pipe plugs (7) from transmission (3).

8

Remove four lube pressure check pipe plugs (8) from transmission (3).

9

Remove pipe plug (9) from transmission (3).

1

Inspect for broken, damaged, or missing parts.

2

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1

Install

2

Install

3

Install

4

Install

5

Install

6

Install

7

Install

(3) .

8

Install

pipe plug (9) to transmission (3).

four lube pressure check pipe plugs (8) to transmission (3).

two hexagon socket pipe plugs (7) to transmission (3).

six clutch and brake pressure check point pipe plugs (6) to transmission (3).

two hexagon socket pipe plugs (5) to transmission (3).

three pipe plugs (4) to transmission (3).

new metallic-encased gasket (2) and oil drain machine threaded plug (1) to transmission

powerplant. Refer to page 2-384.

Vehicle has no brakes when final drives are disconnected. Failure to securely block

vehicle tracks could injure personnel or damage vehicle or other equipment if vehicle

rolls out of control.

1

Park vehicle on level ground. Place 12.0 x 12.0 x 24. 0-in. (30.5 x 30.5 x 61.0 cm) wood block

(or equivalent) under front and rear of each track.

2

Remove hull transmission compartment deck assembly. Refer to page 2-938.

2-751