TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 781 of 1364

TM 9-2350-238-20-1

19

20

NOTE

Steps 19 thru 22 are written for one

final drive but apply to both final

drives.

Slide final drive pinion shaft (7) from inside

of final drive and engage with transmission

shaft (5).

.

Install output shaft retaining ring (6) on

final drive pinion shaft (7).

21

Slide final drive coupling nut (4) onto

transmission shaft (5). Tighten coupling

nut using drift and hammer, or spanner

wrench.

22

Install output drive cap (3), six new

Iockwashers (2), and six screws (1).

Tighten screws to 36 ft-lb (49 N-m).

2-755