TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 901 of 1364

TM 9-2350-238-20-1

NOTE

Step 3 applies to the removal of the

track shoe pad when the track is

installed on the vehicle.

3

Position track shoe (4) between drive hub

sprocket (5) and roadwheel (6).

4

If damaged, remove self-locking nut (7)

and track shoe pad (8) from shoe

assembly (9).

1

2

3

4

5

6

Inspect for broken, damaged, or missing

parts.

Inspect track shoe pads (1) for wear to or

below height of grouser lugs (2).

Inspect track shoe pads (1) for chunks of

rubber gouged out of contact surfaces.

Inspect bushing (3) to ensure that track

pin is centered. Dimension cannot exceed

4.75 in. (12.06 cm).

Using wire brush, clean and remove old

rubber from pad seating area on track

shoe.

Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1) which do not

meet inspection criteria.

2-875