TM-9-2350-238-20-2
CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1993
CHANGE 1
TM-9-2350-238-20-2 - Page 11 of 495
TM 9-2350-238-20- 2
1-9. LOCATION AN D DESCRIPTIO N O F MAJOR COMPONENTS (CONT) .
(2)
The boom winch is mounted on th e
forward wall of the cab at the base of th e
boom. A two-way hydraulic motor powers th e
boom winch. The capacity of the boom winc h
is 30,000 lb (13,620 kg) with 0.625 in .
(1 .588 cm) diameter wire cable .
(3)
The tow winch is mounted to th e
forward deck of the cab under the boo m
winch. The capacity of the tow winch i s
60,000 lb (27,240 kg) with 1.00 in. (2.5 4
cm) diameter wire cable .
b.
Cab (2).
The cab is made of high -
tensile steel plates welded into a box-lik e
structure. It supports the boom, boom winch ,
tow winch, controls, and many of th e
hydraulic system components and reservoir .
The cab can be traversed a full 360 degrees .
c.
Communications Equipment (3).
Th e
tion equipment, refer to TM 9-2350-238-10 ,
communications equipment installed on th e
TM 11-291, TM 11-5820-401-10-1, T M
recovery vehicle consists of radio set, ampli-
11-5820-401-10-2, TM 11-5820-401-20-1 ,
fier, power supply, intercommunication set ,
and TM 11-5820-401-20-2 .
and antenna. For information on communica -
1- 4
Back to Top
