TM-9-2350-238-20-2
CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1993
CHANGE 1
TM-9-2350-238-20-2 - Page 49 of 495
WARNING
TM 9-2350-238-20- 2
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATIO N
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT )
Item
No.
2 5
(cont)
Interval
Item To Check/
Service
Procedure
Drain oil from tow winch.
a.
b.
c.
d.
e.
f.
g.
Rotate drum until drain and check plugs (1) and
(2) are down.
Remove drain and check plugs (1) and (2) from
both ends of drum and drain oil into a suitable
container.
Dry cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
Clean drain and check plug (1) with dry cleaning
solvent (item 10, appx C) and install in brake
end.
Rotate drum until drain and check plug (1) is
horizontal (3 or 9 o’clock) position.
Remove fill plug (3) from support bracket.
Add OE/HDO or OEA (item 14.1 or 14.2, appx
C) at fill plug (3) opening until oil comes out
drain and check plug (2) opening at motor end.
Clean drain and check plug (2) and fill plug (3)
with dry cleaning solvent (item 10, appx C) and
install.
Not Fully Mission
Capable If:
Change 1
2-10.2 1
Back to Top
