WARNING
TM 9-2350-238-20- 2
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH
Item
No.
1 6
1 7
Interval
Q
S
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT )
Item To Check/
Service
Boom Winch
Fill and Level
Tow Winc h
Breather
2-10.1 4
Change 1
LUBRICATIO N
Procedure
NOTE
Remove boom winch cover to gain access
to plugs.
Check oil level.
a.
b.
c.
Remove fill plug (1) and level plug (2).
Add OE/HDO or OEA (item 14.1 or 14.2, appx
C) through fill hole (1) until oil runs out of level
plug hole (2).
Dry cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
Clean fill plug (1) and level plug (2) with dry
cleaning solvent (item 10, appx C) and install.
Not Fully Mission
Capable If: