TM-9-2350-238-20-2
CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1993
CHANGE 1
TM-9-2350-238-20-2 - Page 41 of 495
WARNING
TM 9-2350-238-20- 2
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATIO N
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT )
Item
No.
1 5
Interval
Q
Item To Check/
Service
T
OW Winc h
Fill and Level
Procedure
Check oil level.
a.
Rotate drum until check plug (1) is in horizontal
(3 or 9 o’clock) position.
b. Remove check plug (1) at motor end of winch.
c .
Remove fill plug (2) at brake end.
d. Add OE/HDO or OEA (item 14.1 or 14.2, appx
C) through fill hole (2) until oil runs out of check
plug hole (1).
Dry cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
e. Clean fill plug (2) and check plug (1) with dry
cleaning solvent (item 10, appx C) and install.
Not Fully Mission
Capable If:
Change 1
2-10.1 3
Back to Top
