TM-9-2350-238-20-2
CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1993
CHANGE 1
TM-9-2350-238-20-2 - Page 38 of 495
WARNING
TM 9-2350-238-20- 2
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT )
Item
No.
9
1 0
Interval
Q
Q
Item To Check/
Service
Traversing
Final Drive
Bearings
(C).
Slip Ring
Breather and
Bearing
Procedure
Lubricate two fittings with grease (item 12, appx
a. Lubricate fitting on slip ring bearing (1) with
grease (item 12, appx C).
Dry cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
b. Remove breather (2) and clean with dry cleaning
solvent (item 10, appx C).
c .
Dry, inspect, and install breather (2).
Not Fully Mission
Capable If:
2-10.1 0
Change 1
Back to Top
