TM-9-2350-238-34-1

HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1994

TM-9-2350-238-34-1 - Page 166 of 292

TM 9-2350-238-34-1

2-50. MAINTENANCE OF AIR CLEANER ACCESS DOOR (CONT) .

1

2

3

Inspect for broken, damaged, or missing parts.

If air cleaner door is broken, damaged, or missing, repair is by replacement of next higher

assembly .

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet inspection

criteria.

.

1

2

3

4

5

If nonmetallic seal (1) was removed, clean

air cleaner door (2) with cleaning compound.

Coat new nonmetallic seal (1) with adhesive,

and install on air cleaner door (2).

Install rim latch (3) on air cleaner door (2),

and secure with four new Iockwashers (4)

and four machine screws (5).

Install manual control handle (6) and new

spring pin (7) on headed straight pin (8).

Install new spring tension washer (9), flat

washer (10), and headed straight pin (8) with

manual control handle (6) on air cleaner

door (2).

Install new spring tension washer (11), flat

washer (12), and new spring pin (13) on

headed straight pin (8).

2-15 4