TM-9-2350-238-34-1

HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1994

  TM-9-2350-238-34-1 - Page 163 of 292

TM 9-2350-238-34-1
REASSEMBL Y
1
2
3
4
If nonmetallic seal (1) was removed, clean
door (2) with cleaning compound. Coat new
nonmetallic seal with adhesive and install
new nonmetallic seal on door .
Install flush latch (3) and two plate spacers
(4) in lock support (5).
Install lock support (5) on door (2), and
secure with four flat washers (6), four new
Iockwashers (7), and four machine screws
(8).
Install door handle (9) in door (2), and
secure with three new Iockwashers (10) an d
three machine screws (11) .
2-49. MAINTENANCE OF BATTERY ACCESS COVER .
This task covers:
a.
Disassembl y
b.
Inspection/Repai r
c.
Reassembl y
INITIAL SETU P
Materials/Pad s
Adhesive (item 1, appx B)
Cleaning compound (item 5, appx B)
Handle spring pin (2)
Lockwasher (8 )
Spring pin (2)
Spring tension washer (2)
Reference s
TM 9-2350-238-20- 1
TM 9-2350-238-24P- 1
Equipment Condition s
Battery access cover removed (TM 9-2350-238-20-1)
2-151


Back to Top