TM-9-2350-238-34-1

HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1994

  TM-9-2350-238-34-1 - Page 168 of 292

TM 9-2350-238-34-1
2-51. MAINTENANCE OF ENGINE FUEL FILTER ACCESS DOOR (CONT) .
1
Inspect for broken, damaged, or missing parts .
2
If door plate is broken, damaged, or missing, repair is by replacement of next higher assembly.
3
Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet inspectio n
1
2
3
4
5
6
NOT E
Cushioning pad must be centered on plat e
within 0.03 in. (0.08 cm).
If removed, coat new cushioning pad (1) with
adhesive and install on door plate (2).
Apply antiseize compound to matin g
surfaces of driver’s latch handle (3), new
spring tension washer (4), access door collar
(5), torsion helical spring (6), driver’s latch
wheel (7), flat washer (8), and door plate (2).
NOT E
If necessary, toggle of driver’s latch han-
dle may be bent slightly to aid in
installation .
Install driver’s latch handle (3), new spring tension washer (4), access door collar (5), torsion
helical spring (6), driver’s latch wheel (7), and flat washer (8) on door plate (2).
Install sleeve spacer (9) and slotted plain nut (10) on driver’s latch handle (3).
Install new cotter pin (11) on driver’s latch handle (3).
Install retaining strap (12), two new Iockwashers (13), and two hexagon head capscrews (14) on
door plate (2).
2-156


Back to Top