TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 75 of 292
TM 9-2350-238-34-1
41
Make sure all hose clamps are securely
tightened .
NOT E
Filler, blocks support the fabric fuel
cell in areas where fabric fuel cells
are not attached to the hull. Mak e
sure each filler block is in place
before installing the next block.
Assembling the blocks in an ope n
area prior to installation will help in
identification, location, and installation
of the blocks.
42
Install block 10-R (47) into front of righ t
fabric fuel cell.
43
Install block 9-R (48) into front of right
fabric fuel cell. Make sure coolant heater
fuel intake hose is in filler block slot.
44
Install fuel level transmitter. Refer to T M
9-2350-238-20-1 .
45
Adjust block 9-R (48) until fuel leve l
transmitter float (49) has complet e
freedom of movement .
46
Install block 8-R (50) into forward part o f
ceil. Align cutout with fuel filler hole to
allow installation of fuel filler neck and fuel
filler neck strainer element.
47
Install fuel filler neck strainer element an d
fuel filler neck cap. Refer to TM 9-2350-
238-20-1 .
2-63
Back to Top
