TM-9-2350-238-34-1

HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1994

  TM-9-2350-238-34-1 - Page 68 of 292

WARNING
TM 9-2350-238-34-1
2-31. MAINTENANCE OF FABRIC FUEL CELL INSTALLATION AND FABRIC FUEL CEL L
FILLER BLOCKS (CONT) .
INSTALLATION (CONT )
Apply silicone adhesive sealant only in a well-ventilated area. Keep away from heat,
sparks, and open flame .
NOT E
Silicone adhesive sealant should cure until a skin coat is formed before mating surfac-
es are placed together .
Hand tighten capscrews during installation. Tighten screws to torque specifications
after fabric fuel cell installation is complete.
Allow 6 hours minimum drying tim e
before adding fuel. Take care not to apply silicone adhesive sealant to tube
connections .
9
Secure right fabric fuel cell nut ring (9) to right fabric fuel cell access opening (8) with two cap-
screws (10) through odd-spaced holes offset from centerline. Hand tighten two capscrews (10) .
2-5 6


Back to Top