TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 70 of 292
TM 9-2350-238-34-1
2-31. MAINTENANCE OF FABRIC FUEL CELL INSTALLATION AND FABRIC FUEL CEL L
FILLER BLOCKS (CONT) .
INSTALLATION (CONT )
1 5
1 6
1 7
1 8
1 9
2 0
Remove two capscrews (10) securing righ t
fabric fuel cell to right fabric fuel cell
access opening (8) .
Clean mating surfaces and apply a liberal
amount of silicone adhesive sealant to
right fabric fuel cell access opening (8)
and right fabric fuel cell nut ring (9). Allow
silicone adhesive sealant to form a skin
coat .
Secure right fabric fuel cell nut ring (9) to
right fabric fuel cell access opening (8)
with two capscrews (10) through odd-
spaced holes offset from centerline. Han d
tighten capscrews .
Work right fabric fuel cell nipple over fuel
intake tube (6) until tube protrudes through
nipple. Secure right fabric fuel cell with
hose clamp (20) .
Clean mating surfaces and apply a liberal
amount of silicone adhesive sealant to nut
ring (21) and underside of hull at fuel filler
neck and strainer element access (22),
Allow silicone adhesive sealant to form a
skin coat .
Apply sealing compound to ten capscrews
(23). Secure right fabric fuel cell (7) to
hull with ten flat washers (24) and ten
capscrews (23) installed through righ t
fabric fuel cell into hull, Hand tighten
capscrews.
2-5 8
Back to Top
