TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 62 of 292
caution
TM 9-2350-238-34-1
2-31. MAINTENANCE OF FABRIC FUEL CELL INSTALLATION AND FABRIC FUE L
CELL FILLER BLOCKS (CONT) .
REMOVAL (CONT )
8
9
1 0
Remove six capscrews (6) and six
Iockwashers (7) securing right fuel drain
nut ring (8) to hull.
Reach through fuel filler neck and strainer
element access (9) and remove te n
capscrews (10) and ten flat washers (11).
Enter right vehicle tunnel and remove six
capscrews (12) and six Iockwashers (13)
securing right fabric fuel cell (14) to coolant
heater fuel intake (15).
Do not enter fuel compartment until all
sharp objects are removed fro m
clothing and shoes are wrapped wit h
rags to prevent damage to fabric fuel
cells .
1 1
1 2
1 3
1 4
1 5
Enter right fabric fuel cell (14) and remove
hose clamp (16) and rubber hose (17).
Remove eight capscrews (18) and eight flat
washers (19) at interconnect (20).
Remove hose clamp (21) securing nipple t o
crossover vent tube (22). Pull right fabric
fuel cell free of fitting. Plug or cap cross-
over vent tube (22).
Remove hose clamp (23) securing nipple t o
fuel intake tube (24). Pull right fabric fuel
cell free of fitting. Plug or cap fuel intake
tube (24) .
Remove two capscrews (4) securing righ t
fabric fuel cell (14) to right fabric fuel cell
access opening (25) .
2-5 0
Back to Top
