TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 56 of 292
TM 9-2350-238-34-1
2-30. MAINTENANCE OF AIR CLEANER CENTRIFUGAL FAN (CONT) .
DISASSEMBLY (CONT )
6
7
8
9
Remove self-locking nut (17), flat washer
(18), centrifugal fan impeller (19), and flat
washer (20) from direct current electric motor
(13) .
Remove preformed packing (21) from direc t
current electric motor (13).
If damaged, remove spring pin (22) from
centrifugal blower motor housing (5) .
If damaqed, remove terminal (23) an d
insulation sleeving (24) from electrical lead
(25) .
INSPECTION/REPAIR
1
2
3
Inspect for broken, damaged, or missin g
parts .
If any kit component is damaged, replace
entire air cleaner blower parts kit.
Repair is by replacement of authorized parts
(TM 9-2350-2-8-24P-1) which do not mee t
inspection criteria .
REASSEMBL Y
1
2
3
If removed, install new insulation sleeving (1)
and terminal (2) on electrical lead (3).
If removed, install new spring pin (4) in
centrifugal blower motor housing (5) .
Install new preformed packing (6) in groove
on direct current electric motor (7).
2-4 4
Back to Top
