TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 69 of 292
CAUTION
TM 9-2350-238-34-1
1 0
1 1
1 2
1 3
1 4
Do not enter fuel compartment until
all sharp objects are removed from
clothing and shoes are wrapped wit h
rags to prevent damage to fabric fuel
cell.
Enter right fuel compartment and smoot h
right fabric fuel cell to contours of right fuel
compartment .
Fold down forward right side of right fabric
fuel cell. Clean mating surfaces and apply
a liberal amount of silicone adhesive
sealant to drain nut ring (11) and hull, and
to coolant heater fuel intake (12). Allow
silicone adhesive sealant to form a skin
coat .
Slide right fabric fuel cell over coolant
heater fuel intake tube (13) and press
against hull .
Enter right vehicle tunnel (14). Apply
sealing compound to six capscrews (15) .
Secure right fabric fuel cell (7) to coolant
heater fuel intake (16) with six new
Iockwashers (17) and six capscrews (15).
Hand tighten capscrews .
Install rubber hose (18). Secure rubber
hose with hose clamp (19) .
2-5 7
Back to Top
