TM-9-2350-253-20P-1
TANK, COMBAT, FULL-TRACKED: 105-MM GUN, M60A3 AND M60A3 TTS HULL
TECHNICAL MANUAL; UNIT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
TM-9-2350-253-20P-1 - Page 14 of 724
TM 9-2350-253-20P-1
UNIT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
SECTION I.
INTRODUCTION
1.
Scope.
This RPSTL lists and authorizes spares and repair parts;
special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment
required for performance of Unit, Direct Support and
General Support Maintenance of the M60A3 tank hull.
It
authorizes the requisitioning, issue, and disposition of
spares, repair parts and special tools as indicated by the
source, maintenance and recoverability (SMR) codes.
2.
General.
In addition to Section I.
Introduction, this Repair Parts
and Special Tools List is divided into the following
sections:
a.
Section II.
Repair Parts List
.
A list of spares
and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes
parts which must be removed for replacement of the
authorized parts.
Parts lists are composed of functional
groups in ascending alphanumeric sequence, with the
parts in each group listed in ascending figure and item
number sequence.
Bulk materials are listed in item
name sequence.
Repair kits are listed separately in their
own functional group within Section II.
Repair parts for
repairable special tools are also listed in the section.
Items
listed
are
shown
on
the
associated
illustration(s)/figure(s).
b.
Section III.
Special Tools List
.
A list of special
tools, special
TMDE, and other special
support
equipment authorized by this RPSTL (as indicated by
Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE column) for the performance of
maintenance.
c.
Cross-reference Indexes
.
A list, in National Item
Identification Number (NIIN) sequence, of all National
stock numbered items appearing in the listing, followed
by a list in alphanumeric sequence of all part numbers
appearing; in the listings.
National stock numbers and
part numbers are cross-referenced to each illustration
figure and item number appearance.
The figure and
item number index lists figure and item numbers in
alphanumeric sequence and cross-references NSN,
FSCM, and part numbers.
3.
Explanation of Columns
(Sections II and III).
a.
ITEM NO.
(Column (1)).
Indicates the number
used to identify items called out in the illustration.
b.
SMR CODE
(Column (2)).
The Source,
Maintenance, and Recoverability (SMR) code is a 5-
position
code
containing
supply/requisitioning
information, maintenance category authorization criteria,
and disposition instructions, as shown in the following
breakout:
Source Code
1st two positions
XX
xxx
How you get an item
Maintenance Code
xx
XX
x
3d position
4th position
Who can install,
Who can
replace or use
do complete
the item
repair* on the item
Recoverability Code
xxxx
X
5th position
Who determines disposition action on
an unserviceable item
*Complete Repair: Maintenance capacity, capability, and
authority to perform all corrective maintenance tasks of
the "Repair" function in a use/user environment in order
to restore serviceability to a failed item.
1
Back to Top
