TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 236 of 796

REFUEL/DEFUEL OPERATION - Continued

CAUTION

Do not change FUEL PUMP CONTROL handle setting without setting FLOW

REGULATOR handle to the 10 position. Failure to comply may result in damage to

equipment.

9.

Move FUEL PUMP CONTROL handle (Figure 3, Item 1) to desired position (REFUEL places fuel into the

M88A1, DEFUEL removes fuel from the M88A1).

10.

Set FLOW REGULATOR handle (Figure 3, Item 2) to desired position. Refer to Table 1 for flow setting.

Normal operation will be 3.25 on flow regulator setting. This is about 26 gpm (100 Lpm).

Figure 3.

Fuel Pump Control and Flow Regulator Control.

TM 9-2350-256-10

0046

0046-4