TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 240 of 796

TRANSFER PUMP SHUT DOWN - Continued

4.

Remove screw (Figure 8, Item 10) and disconnect grounding cable (Figure 8, Item 11). Reinstall screw.

5.

Engage nozzle (Figure 8, Item 5) handle to relieve pressure in fuel hose (Figure 8, Item 9). Remove tube

(Figure 8, Item 3 or 13) from fuel tank filler pipe (Figure 8, Item 14), replace filler cap (Figure 8, Item 1), and

close fuel filler cover (Figure 8, Item 2).

6.

Shut down APU (WP 0042) if no longer needed.

7.

Remove fuel hose (Figure 8, Item 9) from fuel hose connection (Figure 8, Item 8) and install hose

connection cap (Figure 8, Item 7).

8.

Install plug (Figure 8, Item 6) on fuel hose (Figure 8, Item 9).

9.

Remove long tube (Figure 8, Item 13) and filter (Figure 8, Item 4) from nozzle (Figure 8, Item 5). Ensure

short tube (Figure 8, Item 3) and filter (Figure 8, Item 4) are installed on nozzle with dust cap

(Figure 8, Item 12) before unit is stowed.

Figure 8.

Transfer Pump Connections.

END OF TASK

END OF WORK PACKAGE

TM 9-2350-256-10

0046

0046-8