TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 246 of 796

AN/VIC-1(V) INTERCOMMUNICATION SET OPERATION - Continued

1.

Turn vehicle MASTER switch (WP 0004) to ON position.

2.

Set MAIN PWR switch (Figure 1, Item 1) to NORM position.

CAUTION

If POWER CKT BKR trips more than once, set MAIN PWR to OFF position and

troubleshoot (WP 0081). Failure to comply may result in damage to equipment.

NOTE

INT ACCENT— OFF: intercom and radio sound levels are equal. INT ACCENT— ON:

radio sound level is lower than intercom.

3.

Set POWER CKT BKR (Figure 1, Item 3) to ON position. POWER lamp (Figure 1, Item 2) should light.

If POWER CKT BKR trips to OFF position, reset to ON position.

Figure 1.

Radio Controls.

TM 9-2350-256-10

0048

0048-2