TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 453 of 796
ENGINE TROUBLESHOOTING
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
15 in. adjustable wrench
(WP 0132, Table 2, Item 88)
Materials/Parts
Wiping rags Qty: AR (WP 0134, Table 1, Item 57)
Personnel Required
Crewman (3)
References
Charging vehicle batteries with Auxiliary Power
Unit (APU) (WP 0043)
References (cont.)
Description and use of operator's controls and
indicators (WP 0004)
Engine deck grilles operation (WP 0030)
Fuel control valves operation (WP 0045)
Fueling (WP 0117)
Main engine air cleaner maintenance (WP 0119)
Preventive Maintenance Checks and Services
(PMCS) – before, including lubrication
instructions (WP 0096)
Starting main engine (WP 0010)
Starting main engine in cold weather
-25°F to 32°F (-32°C to 0°C) (WP 0059)
Transmission shift selection (WP 0012)
Voltage regulator reset (WP 0118)
WARNING
•
Throughout troubleshooting of the electrical system or electrical components, be
certain vehicle MASTER switch (WP 0004) is off between every step unless
otherwise directed. Failure to comply may result in personnel death or injury.
•
Remove any rings, bracelets, wristwatches, and neck chains before working on
any vehicle. Jewelry can catch on equipment and cause injury, or may short
across electrical circuit and cause severe burns or electrical shock. Failure to
comply may result in personnel death or injury.
•
Fuel/solvent/oil is slippery and may cause falls. Wipe up spillage immediately with
rags. Dispose of materials in accordance with local hazardous waste disposal
procedures. Failure to comply may result in personnel death, injury, or damage
to equipment.
TM 9-2350-256-10
0084
0084-1
Back to Top
