TM-9-2350-256-24P-1
M88A1 RECOVERY VEHICLE, FULL TRACKED; MEDIUM
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS)
TM-9-2350-256-24P-1 - Page 18 of 1032
TM 9-2350-256-24P-1
C01
UNIT, DIRECT SUPPORT AND
GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
SECTION I.
INTRODUCTION
1.
Scope.
This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment required for performance of Unit, Direct Support, and General
Support maintenance of the M88A1 Recovery Vehicle.
It authorizes the requisitioning, issue, and disposition of spares,
repair parts and special tools as indicated by the source, maintenance and recoverability (SMR) codes.
2.
General.
In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections:
a.
Section II.
Repair Parts List.
A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance.
The list also includes parts which must be removed for replacement of the
authorized
parts.
Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group
listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence.
Repair parts kits
are listed separately in their own functional group within Section II.
Repair parts for
repairable special tools are also
listed in this section.
Items listed are shown on the associated
illustration(s)/figure(s).
b.
Section III.
Special Tools List.
A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE
column) for the performance of maintenance.
c.
Section IV.
Cross-reference Indexes.
A list, in national item identification number (NIIN) sequence, of all
national stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part numbers
appearing in the listings.
National stock numbers (NSN’s) and part numbers are cross-referenced to each
illustration
figure and item number appearance.
The figure and item number index lists figure and item numbers in
alphanumeric
sequence and cross-references NSN, CAGEC and part numbers.
3.
Explanation of Columns (Section II and III).
a.
ITEM NO.
(Column (1)).
Indicates the number used to identify items called out in the illustration.
b
SMR CODE (Column (2)).
The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as
shown in the following example:
Back to Top
