TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 101 of 772

TM 9-2350-260-20-1-2

AUXILIARY OIL FILTER REPLACEMENT (2A ENGINE) (Sheet 5 of 5)

3.

Install new gasket (G) onto eight studs (H) on

housing.

4.

Install filter assembly (J) into housing.

Push filter

onto eight studs (H).

Make sure slot (K) on top of

filter (J) is alined with stop bolt (L) on housing.

5.

By hand, install eight new self-locking nuts and

washers (M) onto eight studs (H).

6.

Using 1/2 inch socket, tighten nuts (M) onto studs

(H).

7.

Using 1/2 inch wrench on stop bolt (L), tighten

stop bolt.

8.

Fill engine with oil (Item 43, Appendix D) (LO

9-2350-260-12).

9.

Start

engine

and

check

for

leaks

(TM

9-2350-260-10).

10.

Stop engine.

11.

Install upper access cover onto bulkhead (page

16-44).

End of Task

TA147478

6-24