TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 96 of 772
TM 9-2350-260-20-1-2
MAIN OIL FILTER REPLACEMENT (2A ENGINE) (Sheet 5 of 5)
INSTALLATION:
1.
Install new gasket (A) onto six studs (B) on filter
housing.
2.
Install filter (C) into housing as shown making sure
slot (D) in top of filter (C) is alined with stop bolt
(E).
3.
Push filter (C) over six studs (B) and onto housing.
4.
Install six nuts and flat washers (F) onto six studs
(B).
Using 1/2 inch socket, tighten nuts (F) onto
studs (B).
5.
Using 1/2 inch wrench, tighten stop bolt (E).
6.
Fill engine with oil (Item 43, Appendix D) (LO
9-2350260-12).
7.
Start engine and check for leaks (TM
9-2350-260-10.
8.
Stop engine.
9.
Install upper engine access cover onto bulkhead
(page 16-44).
End of Task
TA147473
6-19
Back to Top
