TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 87 of 772
TM 9-2350-260-20-1-2
TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using diagonal cutting pliers, cut safety wire (A)
and remove It from bushing (B) and bracket (C).
2.
Using 3-1/8 inch socket and T-slide wrench,
remove bushing (B) from bracket (C).
3.
Using resilient mount mechanical puller (Item 34,
Chapter 3, Section I), remove two mounts (D) from
bracket (C).
4.
Using bit screwdriver to hold screw (E), use 14/16
inch wrench to remove self-locking nut (F) from
screw(E).
Throw nut away.
5.
Remove screw (E) and roller (G) from bracket (C).
6.
With second person using 1-1/2 inch wrench to
hold bolt (H), use 1-1/2 inch socket and extension
to remove nut (J) from bolt (H).
7.
Remove lockwasher (K) and bolt (H) from bracket
(C).
Throw lockwasher away.
Go on to Sheet 3
TA147464
6-10
Back to Top
