TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 85 of 772
TM 9-2350-260-20-1-2
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Position bolt (A) through bracket (B) and install nut
(Q).
Using 1-1/16 inch wrench to hold nut (C) and
1-1/8 inch socket, tighten bolt (A).
2.
Position bolt (D) through new lockwasher (E),
bracket (B), mount (F), mounting (G), mount (H),
and bushing (J).
Use 1-1/8 inch socket to tighten
bolt (D) while holding bushing (J) with 3/4 inch
drive T-slide and 36 inch extension bar.
3.
Using 1/2 inch socket, install two screws (K)
through new lockwashers (L) and bracket (M) into
mounting (G).
4.
Install 2A powerplant (page 5-14) or 2D
powerplant (page 5-40).
End of Task
TA147463
6-8
Back to Top
