TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 75 of 772
TM 9-2350-260-20-1-2
2A ENGINE AND 2D ENGINE POWERPLANT TESTS (GROUND HOP) (Sheet 14 of 16)
ENGINE FUEL LEAK CHECK:
1.
Remove engine shroud (page 9-2).
2.
Remove right bank engine access coves 2A engine (page 6-77) or 2D engine (page 6-79).
3.
Remove left bank engine access coves 2A engine (page 6-84) or 2D engine (page 6-88).
4.
Remove cooling fans (page 9-48).
5.
Install spacer (Item 2, Chapter 3, Section I) onto each fan drive shaft.
6.
Using 1-1/4 inch socket, install cooling fan nut.
7.
Using torque wrench and 1-1/4 inch socket, tighten cooling fan nut to 45-55 lb-ft (61-75 N
•
m).
Go on to Sheet 15
TA147965
5-65
Back to Top
