TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 80 of 772
TM 9-2350-260-20-1-2
FRONT POWERPLANT GUIDE (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)
TOOLS:
15/16 in. combination box and open end wrench
15/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Hinged handle with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 ft-lb) (0-237 N
•
m)
SUPPLIES:
Lockwasher (MS35338-50) (6 required
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-1)
REMOVAL:
NOTE
Three screws on right guide cannot be
loosened or removed using socket.
Use wrench to remove screws that
cannot be removed using socket
1.
Using socket with hinged handle, loosen screws
(A).
2.
Using socket or wrench, remove six screws and
lockwashers (A).
Throw lockwashers away.
3.
Remove inner support (B) and front guide (C).
INSTALLATION:
1.
Mount inner support (B) and front guide (C).
2.
Install six screws and new lockwashers (A).
NOTE
Three screws on right guide and two
screws on left guide cannot be
torqued.
Use wrench to tighten
screws that cannot be torqued.
3.
Using socket with torque wrench, tighten screws
(A) to 157-212 lb-ft (212-286 N
•
m).
4.
Install 2A powerplant (page 5-14) or 2D
powerplant (page 5-40).
End of Task
TA147458
6-3
Back to Top
