TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 83 of 772
TM 9-2350-260-20-1-2
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 3)
TOOLS:
1-1/16 in. open end wrench
1-1/8 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
36 in. extension with 3/4 in. drive
T-slide handle with 3/4 in. drive
SUPPLIES:
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Lockwasher (MS35338-45) (2 required)
Lockwasher (MS35338-51)
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-1)
NOTE
Removal and installation of left and right engine mounts are the same.
REMOVAL:
1.
Using 1/2 inch socket, remove two screws (A) and
lockwashers (B) from bracket (C).
Throw
lockwashers away.
Go on to Sheet-2
TA147461
6-6
Back to Top
