TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 84 of 772
TM 9-2350-260-20-1-2
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 3)
2.
Using 1-1/8 inch wrench to hold nut (D) and 1-1/8
inch socket on bolt (E), remove nut (D) and bolt
(E) from bracket (F).
3.
Using 1-1/8 inch socket, remove bolt (G) and
lockwasher (H) from bracket (F) while holding
bushing (J) with 3/4 inch drive T-slide and 36 inch
extension bar.
Throw lockwasher away.
4.
Remove bushing (J), mount (K), mounting (L), and
mount (M) from engine assembly.
CLEANING AND INSPECTION:
1.
Clean all parts with dry cleaning solvent (Item 54,
Appendix D) and wipe dry with clean rag (Item 65,
Appendix D).
2.
Inspect bushing, mounts, and mountings for nicks
and burrs.
Replace damaged parts.
Go on to Sheet 3
TA147462
6-7
Back to Top
