TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 103 of 772

TM 9-2350-260-20-1-2

ENGINE OIL FILTER ELEMENT REPLACEMENT (20 ENGINE) (Sheet 2 of 5)

REMOVAL:

1.

Using socket, remove screw (A) and sealing washer from filter element cover (B).

Throw sealing washer away.

2.

Using wrench, turn screw (C) to the left six full turns.

NOTE

Wait about 5 minutes before doing

steps 3 thru 7.

3.

Using socket, remove 10 self-locking nuts and

washers (D).

Throw self-locking nuts away.

4.

Install two 3/8-24NF by 3 inch screws in threaded

holes (E).

5.

Using socket, tighten screws in hole (E) and

remove filter cover (B).

6.

Remove gasket (F) and throw away.

Go on to Sheet 3

TA147480

6-26