TM 9-2350-260-20-1-2
ENGINE OIL LEVEL GAGE CAP REPLACEMENT (2A ENGINE) (Sheet 2 of 4)
6.
Using 1/2 inch socket, remove five screws (H)
securing straps (D).
Remove straps from engine.
7.
Using 1/2 inch socket, remove five screws (J)
securing cover and cap assembly (K) to engine.
8.
Remove cover and cap assembly (K) from engine.
9.
Remove and throw away two preformed packings (L).
10.
Using 1/2 inch socket, remove two bolts and lockwashers (M) securing cap assembly (A) to cover (N).
Throw
lockwasher away.
11.
Remove cap assembly (A) and gasket (P) from cover (N).
Throw gasket away.
Go on to Sheet 3
TA147489
6-35