TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 121 of 772
TM 9-2350-260-20-1-2
OIL FILLER TUBE (UPPER) REPLACEMENT (Sheet 4 of 4)
8.
Place clamp (J) on hose (K) with nut facing you.
9.
Position tube assembly (F) with its assembled
parts on powerplant.
10.
Push tube assembly (F) into hose (K).
11.
Position clamp (J) over end of hose (K).
12.
Place two new lockwashers (L) on two screws (M).
13.
Start two screws (M) through clamps of tube
assembly (F).
14.
Using 1/2 inch socket, tighten two screws (M).
15.
With clamp (J) positioned over end of hose, use
5/16 inch socket and tighten nut of clamp (J).
16.
Position bracket (N), clamp (P), and screw (Q).
17.
Start new locknuts (R) on screw (Q).
18.
Using 1/2 inch socket and wrench, tighten nuts
(R).
19.
Install 2A powerplant (page 5-14) or 2D
powerplant (page 5-40).
End of Task
TA147498
6-44
Back to Top
