TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 130 of 772

TM 9-2350-260-20-1-2

CYLINDER HEAD AND OIL PAN DRAIN TUBES (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)

3.

Holding nut with wrench and using screwdriver, disconnect four fuel line clamps (C) from oil drain line.

4.

Using screwdriver, loosen 16 clamps (D) on 8 hoses (E) on each end of drain tube assembly.

5.

Using pliers, cut lockwire on six capscrews (F).

6.

Using 7/8 inch socket, remove 6 capscrews (F) and 12 washers (G).

7.

Remove washers (G) and throw away.

8.

Remove drain tube assembly (H) from engine.

INSPECTION:

1.

Inspect capscrews r stripped threads.

2.

Inspect hose clamps for general serviceability.

3.

Replace defective part as required.

Go on to Sheet 3

TA147507

6-53