TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 123 of 772

TM 9-2350-260-20-1-2

OIL FILLER TUBE AND HOSE (LOWER) REPLACEMENT (Sheet 2 of 2)

INSTALLATION:]

1.

Push hose (A) over tube assembly (B).

2.

Position clamp (C) over tube assembly (B) end of

hose (A).

3.

Using socket tighten nut of clamp (C).

4.

Place clamp (D) loosely over hose (A) with clamp

nut facing you.

5.

Place assembled parts (A) through (D) in position

on powerplant.

6.

Push end of hose (A) over upper tube end (E).

7.

Position new gasket (F) and tube assembly (B) on

powerplant port.

8.

Place new lockwashers (G) on three screws (H).

9.

Inset three screws (H) in flange of tube assembly

(B) and tighten finger tight.

10.

Using wrench, tighten screws (H).

11.

Position clamp (D) on hose (A) over end of upper

tube end (E).

12.

Using socket, tighten nut of clamp (D).

13.

Install 2A powerplant (page 5-14) or 2D

powerplant (page 5-40).

End of Task

TA147500

6-46