TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 307 of 772

TM 9-2350-260-20-1-2

ENGINE FUEL PUMP REPLACEMENT (Sheet 2 of 4)

REMOVAL:

1.

Using 13/16 inch wrench on adapter (A) and 7/8

inch wrench on line nut (B), remove hose

assembly (C).

2.

Using 3/4 inch wrench on adapter (D) and 7/8 inch

wrench on line nut (E), loosen line nut (E).

3.

Using 3/4 inch wrench, loosen adapter (D) 1/2

turn.

Do not remove adapter (D) at this time.

4.

Using 1/2 inch wrench to hold adapter (F) and 5/8

inch wrench on hose fitting (G), loosen fitting (G).

5.

Using fingers, pull hose assembly (H) loose from

adapter (F).

6.

Using 1/2 inch wrench, remove adapter (F).

7.

Using 3/4 inch wrench on adapter (J) and 7/8 inch

wrench on line nut (K), loosen line nut (K).

8.

Using 13/16 inch wrench, remove adapter (A).

9.

Using 1/2 inch wrench, remove four self-locking

nut (L) and washers (M) from mounting studs (N).

Throw self-locking nut away.

10.

Using both hands, carefully remove fuel pump (P)

from mounting studs (N).

Tube (Q) will

disconnect.

11.

Remove tube (Q).

12.

Using 3/4 inch wrench, remove adapter (D).

13.

Using fingers, remove gasket (R) from mounting

studs (N).

14.

Throw gasket (R) away.

Go on to Sheet 3

TA148113

7-38