TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 303 of 772

TM 9-2350-260-20-1-2

TUBE ASSEMBLY (FUEL INJECTION PUMP INLET TO BULKHEAD ELBOW) REPLACEMENT (Sheet 3 of 5)

7.

Using 7/8 inch wrench, remove tube assembly (C)

from fuel injection pump adapter (G).

8.

Using fingers, remove tube assembly (C) from

tank.

CLEANING AND INSPECTION:

1.

Using rags (Item 65, Appendix D) and dry cleaning

solvent (Item 54, Appendix D), clean elbow and

tube assembly mounting hardware thoroughly.

Using wire brush, clean threaded parts.

2.

Inspect elbow and tube assembly mounting

hardware for bends, breaks, rounded edges, wear,

or thread damage.

Replace if required.

3.

Inspect adapter on fuel injection pump for thread

damage.

INSTALLATION:

NOTE

Coat pipe threads of fittings with

sealing

compound

(Item

27,

Appendix D) before installation.

1.

Using 7/8 inch wrench, install tube assembly (A)

on fuel injection pump adapter (B).

Go on to Sheet 4

TA148109

7-34