TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 295 of 772

TM 9-2350-260-20-1-2

FUEL RETURN LINES REPLACEMENT (2D ENGINE) (Sheet 5 of 10)

18.

Using 1-1/8 inch wrench, disconnect fuel return line (AB) from tube cross (U).

19.

Using 1-1/8 inch wrench, remove nut (AC) from tube cross (U).

20.

Remove flat washer (AD) and tube cross (U).

21.

Place tube cross (U) in vise and using 7/16 inch wrench, remove elbow (X).

22.

Remove tube cross (U) from vise.

23.

Using screwdriver and 7/16 inch wrench, remove screw (AE) and self-locking nut (AF) securing clamp (AG).

Throw

self-locking nut away.

24.

Remove clamp (AG) from fuel return line (V).

25.

Using 3/4 inch wrench on vent valve (AH) and 7/8 inch wrench on fuel return line (V), remove vent valve (AH) from

fuel return line (V).

26.

Using 15/16 inch wrench on elbow (AJ) and 3/4 inch wrench on vent valve (AH), remove vent valve (AH) from elbow

(AJ).

CLEANING AND INSPECTION:

Inspect fuel return lines for deterioration, cracks, stripped threads, and clogging of lines.

Replace unserviceable parts as

required.

Go on to Sheet 6

TA148101

7-26