TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 288 of 772

TM 9-2350-260-20-1-2

FUEL RETURN LINES REPLACEMENT (2A ENGINE) (Sheet 5 of 7)

CLEANING AND INSPECTION:

1.

Using rags (Item 65, Appendix D) and dry cleaning solvent (Item 54, Appendix D), clean fittings clamps, and

mounting hardware thoroughly.

2.

Inspect fittings, clamps, and mounting hardware for nicks, cracks, stripped threads, or wear.

Replace if required.

NOTE

Coat threads of fittings with sealing

compound (Item 27, Appendix D)

before installation.

INSTALLATION:

1.

Using 1/2 inch wrench, install elbow (A) into tube cross (B).

2.

Install tube cross (B) in rear shroud and secure with washer (C) and nut (D).

3.

Using 1 inch wrench on tube cross (B) and 1-1/8 inch wrench on nut (D), tighten nut (D).

4.

Using 1-1/8 inch wrench on hose fitting and 1 inch wrench on tube cross, connect and tighten hose (E) onto tube

cross (B).

Go on to Sheet 6

TA148094

7-19