TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 287 of 772

TM 9-2350-260-20-1-2

FUEL RETURN LINES REPLACEMENT (2A ENGINE) (Sheet 4 of 7)

6.

Using 7/8 inch wrench, disconnect fuel return hose

(Q) from tube cross (M).

7.

Using 1/2 inch wrench on nut (R) and 1/2 inch

socket on screw (S), remove screw (S) and nut (R)

holding clamps (T).

8.

Remove clamps (T) from fuel return hose (Q).

9.

Using 1-1/4 inch wrench, remove check valve (U)

with fuel return hose (Q) attached.

10.

Using 7/8 inch wrench on fuel return hose (Q) and

1-1/4 inch wrench on check valve, remove check

valve (U) from fuel return hose (Q).

11.

Using 1 inch wrench on tube cross (M) and 1-1/8 inch wrench on fitting of hose (V), disconnect hose (V) from tube

cross (M).

12.

Using 1 inch wrench on tube cross (M) and 1-1/8 inch wrench on nut (W), remove nut (W) and washer (X) securing

tube cross (M).

13.

Remove tube cross (M) and elbow (P).

14.

Using 1/2 inch wrench, remove elbow (P) from tube cross (M).

Go on to Sheet 5

TA148093

7-18