TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 278 of 772

TM 9-2350-260-20-1-2

PURGE FUEL SYSTEM (2A ENGINE) (Sheet 3 of 3)

8.

Turn MASTER CONTROL switch ON, set FUEL

PUMPS switch ON (TM 9-2350-260-10).

9.

Disconnect drain hoses (C) from retaining bracket

(D).

10.

Unwind hoses (C) from support brackets (E) and

place ends of tubes (C) into container.

11.

Open fuel drain valves (F) by pulling valve arms

outward and let fuel continue to flow until pure fuel

i being discharged (about 3 quarts).

WARNING

Make sure valves (F) are closed.

Failure to close valves will cause fuel

to be pumped into hull creating a fire

hazard.

12.

Close fuel drain valves F).

13.

Rewind hoses (C) around support brackets (E).

14.

Connect ends of hoses (C) to retaining bracket

(D).

15.

Turn MASTER CONTROL switch OFF.

16.

Install engine upper access cover (page 16-44).

17.

Close grille doors (TM 9-2350-260-10).

End of Task

TA148084

7-9