TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 292 of 772

TM 9-2350-260-20-1-2

FUEL RETURN LINES REPLACEMENT (2D ENGINE) (Sheet 2 of 10)

REMOVAL:

NOTE

Left and right side fuel return lines

are removed the same except for fuel

return lines (A) and (B) on right side.

For left side fuel return lines removal,

go to step 5, skip steps 1 through 4.

1.

Using 1/2 inch wrench, remove screw and washer

(C) securing clamp (D).

2.

Place drip pan under fuel filter (E).

3.

Using 9/16 inch wrench, disconnect fuel return line

(A) at fuel filter (E) and let fuel drain.

4.

Using 9/16 inch wrench, remove fuel return line

(A).

5.

Remove clamp (D) from fuel return line (A).

Go on to Sheet 3

TA148098

7-23