TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 290 of 772
TM 9-2350-260-20-12
FUEL RETURN LINES REPLACEMENT (2A ENGINE) (Sheet 7 of 7)
13.
Position connectors (R) and (S) to injectors and secure with two washers (T) on bolts (U).
Tighten finger tight.
14.
Using 9/16 inch wrench, connect and secure fuel return lines (V) and (F) to connectors (R) and (S) as shown above.
15.
Using 11/16 inch socket, tighten bolts (U).
16.
Perform engine fuel leakage test (page 5-65).
17.
Install engine access covers(page 6-80 and/or 6-86).
18.
Install engine cooling fans (page 949).
19.
Install engine shroud supports (page 9-5).
End of Task
TA148096
7-21
Back to Top
