TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 304 of 772

TM 9-2350-260-20-1-2

TUBE ASSEMBLY (FUEL INJECTION PUMP INLET TO BULKHEAD ELBOW) REPLACEMENT (Sheet 4 of 5)

2.

Using fingers, install bulkhead elbow (C) in hole in

front side of engine bulkhead.

3.

Using 3/4 inch wrench to hold bulkhead elbow (C)

and 1 inch wrench, install flat washer (D), new

lockwasher (E), and nut (F), on bulkhead elbow

(C).

4.

Using 3/4 inch wrench, turn bulkhead elbow (C)

until alined with hose assembly (G).

Tighten nut

(F).

5.

Using 1 inch wrench to hold nut (F) and 7/8 inch

wrench, install tube assembly (A) on bulkhead

elbow (C).

6.

Using 7/8 inch wrench, install hose assembly (G)

on bulkhead elbow (C).

Go on to Sheet 5

TA148110

7-35