TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 330 of 772

TM 9-2350-260-20-1-2

FUEL PUMP REPLACEMENT - RIGHT FUEL TANK (Sheet 1 of 6)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

7-61

Installation

7-64

TOOLS:

7/16 in. socket with 1/2 in. drive

1/2 in. socket with 1/2 in. drive

9/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Torque wrench with 1/2 in. drive (0-175 lb-ft)

(0-237 N

•

m)

Diagonal cutting pliers

Flat-tip screwdriver

Offset fat-tip screwdriver

3/8 in. combination box and open end wrench

Cross-tip screwdriver

SUPPLIES:

Sealing compound (Item 28, Appendix D)

Silicone compound (Item 32, Appendix D)

Lockwire (Item 59, Appendix D)

Gasket (10873918)

Gasket (11637078)

Lockwasher (MS35333-38)

Lockwasher (MS35338-44) (2 required)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURES:

Isolate right fuel tank (TM 9-2350-260-10)

Drain right fuel tank (page 7-152)

REMOVAL:

1.

Open turret platform access door (A) (TM 9-2350-

260-10).

2.

Traverse turret to gain access t cover (B) in

subfloor over right fuel tank (TM 9-2350-260-10).

3.

Using offset flat-tip screwdriver, remove 14 screws

securing access cover (B).

Remove access cover.

Go on to Sheet 2

TA148136

7-61